Announcement

Collapse
No announcement yet.

Do-It-Yourself

Collapse

Do-It-Yourself

  •  
  • Filter
  • Time
  • Show
Clear All
new posts

  • Cheap Easy Basic DIY Canopy

    Cheap Easy Basic DIY Canopy

    Here's how i built my canopy for my 75 gallon. It's basic and simple for $30. If you need it taller to fit lights then substitute 1x8 for 1x6. Like i said, it's cheap and basic. Just make sure you measure the rim of the tank and how much clearance you need for lights. shopping list includes (1) 6' of 1x2 plank (2) 6' of 1x6 plank (1) 10' of 1x12 plank The diagram says 1x10 (my mistake but its 1x12) (2) reg hinges (2) cedar chest hinges screws This is for 75 gallons. Smaller tanks less supplie...
    Go to post

  • DIY Live Rock

    DIY Live Rock

    Heres my recipe for DIY Live rock. ROCK INGREDIENTS: 2 parts portland cement (90lbs bags at hardware store) 3 parts crushed oyster shell (can get small bags at feed stores. they use it to feed chickens) 1-2 parts rock salt (40lbs bags at hardware store. look for water softener isle) MIX IN LAST JUST B4 POURING INTO MOLD You can add more or less rock salt to change texture. Also you can add whole oyster shells to add a different texture. HOW TO MAKE MOLD: Take a plastic storage bend or an...
    Go to post

  • How to prepare whole crab for puffers

    How to prepare whole crab for puffers

    Here's a short video on how to prepare whole crab from the local grocery store to feed your puffer. It doesn't matter if it's a fw, bw, or sw puffer the preparation is the same. Also doesn't matter if your puffer is 1" or 20" feeding is the same. Hope you enjoy the video.

    Go to post

  • Shrimp Mix step-by-step with pictures

    Shrimp Mix step-by-step with pictures

    Several people have asked me about my particular shrimp mix since I do not use gelatin and I thought to post the step by step process in a very detailed way so that it can be seen and its not that scary to make.

    The ingredients list is as follows and does not use or need a gelatin mix..

    The below will make 9 lbs of shrimp mix... which lasts me about a month

    1 lb spinach All ingredients should be fresh, without additives and washed many times. ...
    Go to post

  • Just Another DIY Egg Tumbler...

    Just Another DIY Egg Tumbler...

    Been wanting to do this for a while now but finally got around to making my first egg tumbler so i thought i would share the experience and show the inexperienced how i assembled it. very easy and only took about 15 min to assemble. i started with a clear plastic fluorescent bulb guard. can be found in the lighting section of HD or lowes. and fiberglass screen like you would use on windows or doors. First I cut a 4" section and a 1 1/2" section off of the clear plastic tube ...
    Go to post

  • DIY Bannana Worms

    DIY Bannana Worms

    Bananas aren't just for feeding monkeys anymore.
    They are a worldwide food crop. Did you know that if you separate the bananas from the each other they will ripen more slowly? Ever watch a monkey bite off the end of a banana and peal it towards the stem. If you peal your bananas that way you will not leave any of those messy strings behind. But life is not just a bunch of bananas, attacking the roots of those banana trees are Banana worms. They are a major pest of banana crops worldwide. Banana worm...
    Go to post

  • DIY BBS HATCHING

    DIY BBS HATCHING



    This brine shrimp hatchery consists of a rack made from 1x6 pine, three bubblers and 3 empty rum bottles (1.75 liter) with the bottom cut off and the cap screwed on tight. The bottles sit on a shelf with the bottleneck inserted through a retaining hole in the shelf. Disposable bowl covers are provided as a splashguard.

    Invite a friend or two over to help empty the rum bottles.

    The bubblers consists of a length of rigid plastic tubing on the end
    ...
    Go to post

  • DEFENDING THE RELM FROM HYDRA

    DEFENDING THE RELM FROM HYDRA

    The Hydra lived in the swamps near to the city of Lerna in Argolis, and was a terrifying monster.




    The Hydra had the body of a serpent and 9 heads, if any of the heads were severed another would grow in its place. The Hydra's bad breath or poisonous blood was enough to kill man or beast. It totally terrorized the vicinity for many years.


    Like its namesake,...
    Go to post

  • DIY egg tumbler

    DIY egg tumbler

    It tumbles black eyed peas pretty good.

    1. Cut the bottom out with a 1" lip.
    2. Cut a circular piece of plastic canvas so it could be inserted inside and glued.
    a. About 1" into the bottle.
    b. Used that new gorilla super glue. It is thick and dry's rubbery.
    3. Rotated the bottle with the glue in it to evenly coat edge of plastic canvas. 4. Let it dry over night on it's side so the glue does not run down the bottle and keep rotating. 5. Next cut out the bottom of the bot...
    Go to post

  • How to build a DIY Carbon Snake (carbon hose)

    How to build a DIY Carbon Snake (carbon hose)

    First things first this carbon snake is the design and creation of our resident DIY guru John Crowder (FSHFRK), I am just some random joker who witnessed it and who has enough time to type all this out.

    NEEDED MATERIALS
    All materials listed below available at Lowe's
    1.5 Inch ID PVC Spa Flex Pipe (10-20FT)
    1.5 x 3/4 Inch SCH 40 Bushing (2)
    1.5 Inch SCH 40 Adapter (2)
    3/4 GH x 3/4 Inch MIP fitting (2)
    4' - 6' Rubber washing machine fill hose ...
    Go to post
There are no articles in this category.
 
  • Filter
  • Time
  • Show
Clear All
new posts
Please log in to your account to view your subscribed posts.

Latest Articles

Collapse

Working...
X