I searched around this forum for DIY w/d and Did one myself today for my 210 gallon tank predrill 2 holes on each side.
I used 40 gallon rubbermaid, 2x 5 gallons bucket from homedepot, and two flower pot tray.
First i drilled many holes at the bottom of each bucket and also on the flower pot tray.
And since my bulkhead (drain) on the tank is 1" pvc so i used 1" pvc on on the lids.
I used 1/2" pvc to make a stand for the bucket (7" tall).
On the returning hoses, i used 5/8" hoses with the check valves so the water wont flow back to the sump when the power is out.
This is my first time so i need some advise from you guy. Will this w/d work? and do i use two pump for this? because there are two returning hoses.
Any advise that will make this thing work will be appreciated :)
Here are some picture that i took
I used 40 gallon rubbermaid, 2x 5 gallons bucket from homedepot, and two flower pot tray.
First i drilled many holes at the bottom of each bucket and also on the flower pot tray.
And since my bulkhead (drain) on the tank is 1" pvc so i used 1" pvc on on the lids.
I used 1/2" pvc to make a stand for the bucket (7" tall).
On the returning hoses, i used 5/8" hoses with the check valves so the water wont flow back to the sump when the power is out.
This is my first time so i need some advise from you guy. Will this w/d work? and do i use two pump for this? because there are two returning hoses.
Any advise that will make this thing work will be appreciated :)
Here are some picture that i took
Comment