Tweet
Anyone know if the AGA 90G can be drilled? Also what bit do I need to get to drill it? I want to add a 2260 along with a wet/dry on this and I dont want to see the tubing. This needs to be clean.
-
You're 90g was reef-ready right? I think that's what you told me. If so it should be safe to drill. Here's one for a good price and instructional video http://cgi.ebay.com/1-3-4-INCH-GLASS...#ht_2950wt_911 -
Yeah its a AGA 90G RRComment
-
he sells a bit to drill for 3/4" bulkheads too if u need one smaller.....but i think it would be a 1 inch for the 2260.Last edited by jsnoravo; 05-24-2010, 11:50 PM.Comment
-
I have had goog success with some diamond bits I got off of eBay. $5-$10 a piece. I have them for 1/2", 3/4", and 1" bulkheads. If you haven't drilled yet you can use them. If you look closely at a sheet of tempered glass you can see a line near or t the center of the edge view. If you have any questions about the bottom you can drill the backwall near the bottom and hide the bulkheads in the substrate.Richard DouglasComment
Comment