Tweet
I had this nano laying around and didnt feel like buying new bulbs, also was missing the ballast which also needed a new fuse so i said forget it and went with led's its was pretty easy to do:
1st is took out all of the existing housing with only one tool, a philips screwdriver
2nd i went to walmart and bought an led light that was really similar to this but only 24.99 and has 66 leds with two settings, http://www.walmart.com/ip/Peak-30-LE...light/15127250
3rd, i took apart the light and fitted it into the hood, keeping the PC clips and mounting those to the hood,
4th, i took a dremel and cut a small rectangle for the switch
5th, i put the water shield back on and it was pretty much good to go, there was a little more that i did but heres some pics
for some reason i cant upload the pics of the process but heres what it looks like now
IMG_0162.jpgIMG_0164.jpgIMG_0161.jpgIMG_0165.jpgIMG_0166.jpg
1st is took out all of the existing housing with only one tool, a philips screwdriver
2nd i went to walmart and bought an led light that was really similar to this but only 24.99 and has 66 leds with two settings, http://www.walmart.com/ip/Peak-30-LE...light/15127250
3rd, i took apart the light and fitted it into the hood, keeping the PC clips and mounting those to the hood,
4th, i took a dremel and cut a small rectangle for the switch
5th, i put the water shield back on and it was pretty much good to go, there was a little more that i did but heres some pics
for some reason i cant upload the pics of the process but heres what it looks like now
IMG_0162.jpgIMG_0164.jpgIMG_0161.jpgIMG_0165.jpgIMG_0166.jpg
Comment