Does anyone have any tips and things to know before I attempt to remove the inside scratched from my acrylic tank? Scratches are fairly light caused by sand in an algae scrubber. I was thinking using 2000 grit sand paper and 2500 grit. Wet sanded. And then polish the sanded area with plastx. Is this as simple as it sounds?
Announcement
Collapse
No announcement yet.
acrylic scratch repair
Collapse
X
-
RainX headlight repair with a buffer wheel on med/light speed. For a cleaner use brilliaze plastic polish in ared bottle.5 gal baby hecqui grow out
7 gal baby compressicps
14 bio cube fry tank, multies-orange leleupi-telmatochromis
4 tank rack- 30 cubes. Shellies, mulities-brevis-telmatochromis-caudopunctaus
100 gal mixed community tank
125 Tropheus black bembas
Tanngankia cichlids what else
-
Watch this video, it will show you how: the key is to allow your sander to just glide on the wet acrylic surface, Not putting any heavy pressure, use spray bottle to spray alot of dish washing soap mixed with water when sanding, use alot of micro towels for each separate application, separate towels for wet sanding only & separate towels for polishing or buffing. Take your time and focus on sanding & polishing small portions at a time especially in small tight areas. I use 2 or 3 different types & shapes of buffer wheels, find the lightest weight for your power drill. I will use micro towels to constantly wipe down the acrylic area clean and resand or polish again if necessary. I will repeat this process until i am very satisfied with the results. I also replay the youtube video if necessary, hope this helps.... good luck!
Removing scratches from an acrylic aquarium
http://www.youtube.com/watch?v=QnIwVp2a7F8
Meguiar's Headlight restoration kit with buffer wheel
http://www.autozone.com/autozone/acc...mString=search
http://http://www.autozone.com/autoz...er=218632_0_0_
3M - Wet dry 2000 grit sandpaper
http://www.autozone.com/autozone/accessories/3M-Wetordry-automotive-sandpaper/_/N-25x8?itemIdentifier=241934_0_0_175G BowFront - WC Zaire Moliro
175G BowFront - WC Zaire Kitumba
210G - WC Zaire Tembwe
150 Acrylic RR - Empty
46G BowFront - Lake Tanganyika
Comment
-
Originally posted by LegerJP View PostDoes anyone have any tips and things to know before I attempt to remove the inside scratched from my acrylic tank? Scratches are fairly light caused by sand in an algae scrubber. I was thinking using 2000 grit sand paper and 2500 grit. Wet sanded. And then polish the sanded area with plastx. Is this as simple as it sounds?
Comment
Comment