hey guys, just made 4 sponge filters for my fry tanks. i could find anything on utube. so i looked at some on aquabid, the only thing is they dont show a brake down of there stuff. but maybe any of u guys with these can tell if they look right. i know theyre not pretty but functional
i cut tile into 4" peices, then took 3/4" pvc and cut it to where it was just long enough to break the surface of the fry tank, about 6". i then drilled several holes aprox.3/8". i bonded them together with a 2 part poxy,i found a giant bio sponge for pond filters in some hole in the wall of a place. still havent found any more.cut the sponge down to about 4" squares. it was round so i had some scrap.i got six out of it. i got them all tied into 1 pump and a 5 way adjustable junktion.im pretty sure it works, i just dont have anything to compare it to.
i cut tile into 4" peices, then took 3/4" pvc and cut it to where it was just long enough to break the surface of the fry tank, about 6". i then drilled several holes aprox.3/8". i bonded them together with a 2 part poxy,i found a giant bio sponge for pond filters in some hole in the wall of a place. still havent found any more.cut the sponge down to about 4" squares. it was round so i had some scrap.i got six out of it. i got them all tied into 1 pump and a 5 way adjustable junktion.im pretty sure it works, i just dont have anything to compare it to.
Comment