Tysons livebearer's thread - New pics up :)

[TexSun]

Looking good.

[tys91]

Re: Tysons livebearer's thread

thanks but not yet lol



drained for the 5th time!

this is going to be a nightmare lol

cheers
Tys

[mistahoo]

Kinda, since you didn't rinse the sand in a bucket. What you could do is do a 100% water change and then when you refill, use a plastic cup or bowl to deflect the water coming into the tank. That way it doesn't throw the sand everywhere.

There's always the option to let the water sit if you're patient enough. After a while the sand will settle on the bottom.

[tys91]

Re: Tysons livebearer's thread

i did rinse it . With my hands in the tank and filled and drained at the same time. Il let my fulval try settle it. I have a large sponge in there as a pre filter. Il let it all be for now and see how it turns out

cheers
Tys

[troy tucker]

Il let my fulval try settle it.

IMO: this is a bad idea. Turn the filters off. Remove all the water or as much as possable. Wait 24 hours and then fill using a plate on the sand to deflect the water off the sand and fill slow.
If you run the filter with all the sand flying around it will wear out internal parts faster.

[tys91]

Re: Tysons livebearer's thread

IMO: this is a bad idea. Turn the filters off. Remove all the water or as much as possable. Wait 24 hours and then fill using a plate on the sand to deflect the water off the sand and fill slow.
If you run the filter with all the sand flying around it will wear out internal parts faster.

ok fikters off but i have a aponge on the ene so i dont think the sand will make i to the canister? and also. ive drained it like 5 times alreasy lol but yes il try this method. Let it sit for 24 then rill slow sounds good

cheers
Tys

[tys91]

Re: Tysons livebearer's thread



tank drained now to wait 24hrs and fill up slowly againn ... mmmmm
cheers


edit

i filled it uo with a bit of water and stired it up il let it sit and half fill then drain tomroo


Tys

[mistahoo]

Re: Tysons livebearer's thread

ok fikters off but i have a aponge on the ene so i dont think the sand will make i to the canister? and also. ive drained it like 5 times alreasy lol but yes il try this method. Let it sit for 24 then rill slow sounds good

cheers
Tys

It will still make it to the filter even if you have a pre filter

Sent from my spaceship using Tapatalk 2.

[mistahoo]

Re: Tysons livebearer's thread

Imo stop stirring it. You're just causing a mess. You don't have to let it sit for 24 hrs. Just drain it completely and let it sit for a bit. Then refill slowly with a bowl/plate/cup to deflect water as to keep from stirring up the sand again.

Sent from my spaceship using Tapatalk 2.

[tys91]

Re: Tysons livebearer's thread



still seems very dirty.

take 6
i think i better staet training up for wen my dad sees the water bill.
gons be like mike tyson and hollyfield lmao

cheers
Tys

[tys91]

Re: Tysons livebearer's thread


just about to give up lmao

cheers
Tys

[mistahoo]

Re: Tysons livebearer's thread

When it's full let it sit. The sand should settle at the bottom. Then turn on your filter and it'll clear up. It's what I did with my tank. I put in the sand when the water was already in. Only took a day for the sand to settle then the filters cleaned up the rest.

Sent from my spaceship using Tapatalk 2.

[tys91]

Re: Tysons livebearer's thread

just filled. Its more milky looking rather then sand.
cant seem to get my head around this , everytime i even tocuh the sand a milky dirty cloud pops up which turns the tank like this , its a nightmare , i may just leave the tank for couple days and see what happends my filters are currently off

cheers
Tys

[mnemenoi]

Washing the sand prior to putting it in the tank is really the trick and until the water is clear, keep rinsing. If it looks a slight bit cloudy, rinse it five more times at least. The effect is amplified once it gets in the tank. You are experiancing a very fine dustlike particulate that sand collects when it is dry and the only way to remove it is through water changeing it. With it being that bad, I'd recommend complete removal and starting over again. Otherwise, every time you mess with anything in the tank, you'll stir up that fine sediment and it will clog filters until it is removed. To avoid months and years of headache, just drain the tank, pull out sand by the buckets and rinse it thouroughly. Take your time doing it and make sure its clear of any cloudiness or particulates, you'll be happy you took the time and will make it far more fun years down the road.

[tys91]

Re: Tysons livebearer's thread

complete removal it is.
im currently on work holidays so im more than happy to do some hard work. Il get all this in a wheel barrow tommoro and hose it in there. As you can see in my picture i have a easy access window. So il transfer it out thata way tommoro. Il rinse it the best i can. Its going to be a struggle to get out. May have to purchase a mini shovel

cheers
Tys