RO/DI from homes MANABLOC

[inkrediblek68]

Hello all!!!

Just now getting into the saltwater tanks. I've ordered my BRS RO/DI system. I was figuring where Id put my mixing station. The best location is in my garage. The only water source in there is from a MANABLOC water distributing system. There are two available spots where I could hook up my RO/DI system. I just wanted to see :

1. Has anyone done this before?
2. Would the pressure coming from the MANABLOC mess up the RO/DI system?
3. Is there anything I should know before doing so?


any input is much appreciated!

[inkrediblek68]

ok so I found out for myself, that the RO/DI I ordered came with the fitting for a water hose. Which was the same size the manabloc used. so it was pretty simple. I had also ordered the pressure gauge, which also is right where it needs to be at 60 PSI.

[mredman]

Send photos of your setup.

Mike

[inkrediblek68]

IMG_0992.jpgIMG_1002.jpgIMG_1071.jpg



Still running the lines through my walls but that's pretty much it. Just slipped the Red (in) line and that's the end result!

[mredman]

What type and size reservoir and shut offs are you using? Thanks for the progress report.

Mike