Tweet
I bought this late last year, well it won't fit in the new house :( LOL...it can physically fit, BUT it'll either block a window or stick further than the opening of the wall and I am not about to tear down a wall on a new house to make this tank work.
I am going to order a 12 feet x 3 ft wide tank instead.
My lost is your gain, I paid $ 4200 SHIPPED to me. All I am asking is $ 3200
This is for tank only, need a stand ? I can build you one, we can talk later.
Tenecor Acrylic 600 Gallon
DIMENSION: 8 feet long, 4 feet wide and 2.5 feet tall
THICKNESS: 3/4" Acrylic all the way around
Setup as peninsula tank although you can put a black vinyl and set it against the wall (I ordered it as a peninsula because I can run it either ways)
Black BOTTOM (not laminate, but an actual black acrylic bottom for bare bottom application) This setup costed me $ 800 extra
BUKLHEADS:
4 - 2" bulkhead holes drilled on the overflow side
2 - 1.5" bulkhead holes drill on the bottom
1 - external overflow with 2 - 1.5" bulkhead holes. I only need a small overflow because all my drain was going to come from the 2" bulkheads on the overflow wall. This way it eliminate ALL the gurgling noises. I was planning on having a pump to suck the the incoming water versus banking my luck on durso :) This setup was going to be in the living room and the condition of this tank is that it has to be very quiet. The external overflow is going to be used for continous drip system drain.
2 - Oversize Lids 27" x 24"
4 - Feeding Holes
Still in wrapping, ZERO scratches and not to mention a LIFETIME WARRANTY
Again, I paid $ 4200 SHIPPED to me. All I am asking is $ 3200
I will not negotiate. If I were, then I'd post a higher price. I figured I can cut all the BS and go straight to the bottom dollar.
If I can't sell it for 3K, then I'll keep it. I'll tear a wall in my office and set it up there :)
Located in fort worth. I do have a truck and a trailer and can help you move it to houston for gass money.
SERIOUS INQUIRIES ONLY !!!!
Stan
I am going to order a 12 feet x 3 ft wide tank instead.
My lost is your gain, I paid $ 4200 SHIPPED to me. All I am asking is $ 3200
This is for tank only, need a stand ? I can build you one, we can talk later.
Tenecor Acrylic 600 Gallon
DIMENSION: 8 feet long, 4 feet wide and 2.5 feet tall
THICKNESS: 3/4" Acrylic all the way around
Setup as peninsula tank although you can put a black vinyl and set it against the wall (I ordered it as a peninsula because I can run it either ways)
Black BOTTOM (not laminate, but an actual black acrylic bottom for bare bottom application) This setup costed me $ 800 extra
BUKLHEADS:
4 - 2" bulkhead holes drilled on the overflow side
2 - 1.5" bulkhead holes drill on the bottom
1 - external overflow with 2 - 1.5" bulkhead holes. I only need a small overflow because all my drain was going to come from the 2" bulkheads on the overflow wall. This way it eliminate ALL the gurgling noises. I was planning on having a pump to suck the the incoming water versus banking my luck on durso :) This setup was going to be in the living room and the condition of this tank is that it has to be very quiet. The external overflow is going to be used for continous drip system drain.
2 - Oversize Lids 27" x 24"
4 - Feeding Holes
Still in wrapping, ZERO scratches and not to mention a LIFETIME WARRANTY
Again, I paid $ 4200 SHIPPED to me. All I am asking is $ 3200
I will not negotiate. If I were, then I'd post a higher price. I figured I can cut all the BS and go straight to the bottom dollar.
If I can't sell it for 3K, then I'll keep it. I'll tear a wall in my office and set it up there :)
Located in fort worth. I do have a truck and a trailer and can help you move it to houston for gass money.
SERIOUS INQUIRIES ONLY !!!!
Stan
All residential concrete foundation slab must be at least 4" thick in order to gain permit to build. This tank filled with water and RUNNING with a 180 gallon sump is only at 60%-70% of the foundation capacity on 8 - 4x4 legs
Comment