Tweet
I picked this up from the box about 3 weeks ago and just set it up a couple nights ago. With it being my first wet/dry, it's a little too flawed to make me sleep at night, but easily tweakable by the more experienced. Everything is solid, the sump/overflow etc etc. For some reason there are holes drilled to the outside, right under the bioballs. 6 holes, about 1/4" diameter. I didn't realize this at time of purchase, it has been slightly modified to cover it up, but it still leaked on me through those holes. My temporary solution was to just silicone up the holes, it worked, but again, just temporary im sure.
Anyway - Dimensions are 8x18x14, comes with overflow and 1in down tubing. I bought a 560gph pump, which worked nicely - the priming tube never had any air bubbles. It also comes with an eheim spray bar and the pump.
I payed 50 for the wetdry and 40 for the pump - I'd be happy with $70 for both, or trade for a fairly newish eheim 2215.
Thanks
Can PM or text me at (248) 372-1600. I'm golfing most of today, so responses via text may be sporatic.
Andrew
Anyway - Dimensions are 8x18x14, comes with overflow and 1in down tubing. I bought a 560gph pump, which worked nicely - the priming tube never had any air bubbles. It also comes with an eheim spray bar and the pump.
I payed 50 for the wetdry and 40 for the pump - I'd be happy with $70 for both, or trade for a fairly newish eheim 2215.
Thanks
Can PM or text me at (248) 372-1600. I'm golfing most of today, so responses via text may be sporatic.
Andrew