If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
Scarecrow : I haven't got a brain... only straw.
Dorothy : How can you talk if you haven't got a brain?
Scarecrow: I don't know... But some people without brains do an awful lot of talking... don't they?
Dorothy: Yes, I guess you're right.
that's nice Ken......even though you took your time to update us...it was well worth the wait.....thanks for sharing....
now don't wait so long to keep us in the loop.....
that's very nice...
that sand looks very good in there too.....can't wait to see fishies in there.....
Ken -- absolutely stunning -- I loved the picture where you can see everything surrounding the aquarium as it gives such an excellent perspective of your hard work :) I am going to agree with FL -- we want pictures of the fish when they come in :)
What fish do Jesper have 180 WC T. Moorii Chilambo +1 Petro trewavasae.
110 Cyps, WC Xeno Spilopterus Kipili WC/F1/F2 T. sp red Kiku
58 S. Decorus "The problem with socialism is that eventually you run out of other people's money." -Margaret Thatcher
Yeah, I did it all myself for the most part. I did have a buddy help with the framing. The other background was too cheaply made. I sent it back and decided to make my own. It's light-years ahead of what I tried from the online place.
that background is really awesome looking, is there a how to guide online that you followed, or could you give us a rough howto on that?
Well, basically, I looked at several how-to's. I bought styrofoam blocks and carved it out like I wanted in 3 sections. 1 long back-piece and 2 sides. Then I cut the back piece into 3 pieces so I could fit it in around my tank brace. Then I covered the front side of each piece with quickrete(here is where I made a mistake, I should've put several coats on. I didn't and then had to reapply several coats once it was in the tank, major pain). Then I laid the tank down on it's back and used silicone to attach the pieces to the tank. Then once it was in there, I did several more layers of concrete in different colors(not full layers, I was just aiming to cover the areas where the styrofoam was still showing through). The big thing here is to ensure you cover the seams, but not making it so that you could tell there was a seam there because of the concrete color. A lot of blending is necessary.
Some lessons learned: Ensure you do most of your concrete before you silicone the pieces in. You should only need to cover the seams after it's in. When you think you have enough concrete, add some more. I can't tell you how many times I thought I had covered all of the little styrofoam pieces, only to realize after I had water in, that that one little GLOWING white piece of styrofoam was only covered with dye and not concrete. The dye comes right off. Make sure you make your cavities for your pump/heater/power heads, etc big enough. Over-estimate. It sucks to carve it out once it's in the tank. Measure five times, cut once.
Comment